200/22: set interfaces ethernet eth0 address dhcp: set interfaces ethernet eth0 description.My question is if the RDS server is seeing that, why isn't your DHCP server? If you dhcp server IS seeing that name, do you have it setup to allow the DHCP server to update DNS?Thanks, George. The DHCP server does not see any name for the ThinStation clients.not sure how the RDS server is seeing the name in Task Manager > Client Name field.curious.Do you know if it's possible to join ThinStation machines to a domain? Sounds like allowing insecure DNS updates isn't a good idea. To configure Linux as DNS client you need to edit or modify /etc/resolv.conf file.CrimsonKidA wrote:Thank you, George. I'm using my ownAs mentioned in the overview section, option 60 identifies and associates a DHCP client with a particular vendor. Any DHCP server configured to take action.The DHCP server in turn leases the client an IP address within a given range or leases the client an IP address based on the MAC address of the client’s network interface card (NIC). I have configured my Windows 2008 server with DHCP Option 119 (search domains).One solution is to implement Domain Name Server (DNS) and Dynamic Host Configuration Protocol (DHCP) with dnsmasq, and thereby cache external DNS addresses for performance reasons, dynamically assign IP addresses to all of the members of your network, and manage everything from one location. As the network grows, however, and as internal services (wikis, mail servers, media servers, and more) come online, recalling numeric addresses becomes unwieldy. When a network is small and most of its users interact chiefly with services on the Internet at large, it’s easy to get by simply by assigning numeric Internet Protocol addresses to your nodes rather than names.
![]() Linux Dhcp Set Dns For Client Install Dnsmasq AndTo simplify things you can also configure dnsmasq to supply each node with an IP address using the DHCP protocol. Users of the network must use difficult-to-remember numerical IP addresses to access internal network services.To avoid this, you can install dnsmasq and configure it to know about all of the nodes on your network, and supply that information as a DNS server. But since these nodes are on a private network, the organization’s public DNS servers don’t know about them. The administrator of the network simply configures each new machine with the next available IP address in the range being used (e.g. Dragon ball raging blast 2 pc downloadWhen a DNS lookup request comes in, dnsmasq first looks in its /etc/hosts file to see if an entry there matches the request. Open source firmware for routers, such as OpenWRT and Tomato, also include dnsmasq, so you can combine your DNS, DHCP, and routing functions on a single box.On a typically configured system, once dnsmasq is started, it is prepared to act as a DNS server for the rest of your network. Building from source is a matter of running make make install, but most Linux distributions include dnsmasq as an installable package. This way all of the IP configuration information for the LAN can be kept in one place.Installing dnsmasq is straightforward. Search for dhcp-range, which you will probably find on a commented-out line. Because of this, even if you are already using a DHCP server (for example, from your router) you may wish to disable it and use dnsmasq’s services instead.To enable DHCP in dnsmasq, edit the dnsmasq.conf file (typically found in /etc on most Linux distributions). Installing new systems or setting up the next generation of network-based multimedia devices is likewise easier if those systems can simply be supplied their network information automatically when they boot.Dnsmasq has a built-in DHCP server that integrates well with its DNS capabilities. If you have a laptop that joins several networks, it may be convenient to have it configured automatically when it joins your network. As an added benefit, after dnsmasq retrieves an address from an Internet DNS server, it caches the result and uses that value to respond to further requests for that address, with the resulting performance improvement.Once you have basic DNS services set up for your network, your attention may turn to other aspects of configuring your network. If /etc/hosts looks like:Note that you can mask real external domain names with entries in /etc/hosts since /etc/hosts entries take priority.Once you’ve set up the dnsmasq system this way, you can enter its IP address as the Domain Name Server on any of the other systems on your network, and they will then be able to use host names instead of IP addresses to access TCP/IP network resources. This address takes the form of six groups of two hexadecimal digits — for example, 00:04:5A:84:EA:8D. When a request for a DHCP address is broadcast, it is broadcast with the device’s MAC address. This is a unique identifier assigned to devices that participate in an Ethernet network. It may be desirable to give a laptop a fixed address and name to facilitate file transfers and backups, for example.You can do this using a hardware or MAC address. Restart dnsmasq, and from then on, when a system joins your network, dnsmasq will give it the next available address in the specified range of IP addresses, and assign the appropriate default route.There are times when it’s desirable to have a machine that gets its network configuration via DHCP get the same IP address each time it requests one. This line tells the DHCP server to tell any clients that are assigned an IP address that their default router is at 192.168.168.1 (substitute the address of the default router on your network). When the system you are interested in requests a DHCP address, its MAC address will be logged.Once you know the system’s MAC address you can use it to assign it an IP address and domain name. On a Linux system, the ifconfig command will display information about the Ethernet devices on the system, labeled as the “HWADDR.” If all else fails you can monitor syslog on the system on which dnsmasq is running. Often it is printed near the Ethernet port. If you replace the Ethernet card on a computer, its MAC address will change but its IP address will likely stay the same.There are several ways to determine the MAC address of a device. Let’s say that you want to assign the system with the MAC address 00:04:5A:84:EA:8D the IP address 192.168.168.12 and the name “Howard.
0 Comments
Leave a Reply. |
AuthorAndy ArchivesCategories |